Bedford County right hand, flint lock, by L&R
Part Number: LOCK-LR-BED-F
Availability: In Stock
Price: $229.00
Order Quantity:
Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with long thin lock plates and “slash” molding decoration filed across a rattail? Why would the Bedford County makers laboriously hand file and hand fit each lock part, long after other makers were using purchased locks? Perhaps the answer is suggested in Calvin Hetrick’s book The Bedford County Rifle and its Makers. The reason behind the success of any commercial enterprise is customer acceptance and demand.

Longrifles made in the region of Bedford County, Pennsylvania, are immediately recognizable. These rifles are long, thin, and graceful, with a low comb. Perhaps the customers of the Bedford County makers knew and liked this style, and demanded fine quality hand made flint locks. Or perhaps purchased flint locks would have altered the style of the gun too much to satisfy Bedford makers.

We may never fully understand Bedford County rifles. We know that rifles were made in Bedford County as early as 1776, and many were made between 1800 and 1890. This span makes the Bedford County rifle contemporary to the Brown Bess musket, the Hawken plains rifle, the Colt revolver, and even the Winchester lever action.

L&R’s flint lock captures the essence of the early Bedford County rifle, after this distinctive style of lock had been clearly established. Most photos of Bedford County rifles show percussion locks, but flint locks are known. Calvin Hetrick names several makers of flint rifles, including Joseph Mills of Colerain Township, who is little known except for his superior workmanship. All known specimens of his work were originally flint ignition.

In keeping with the late flint period styling, this lock has a semi-waterproof pan with rain gutters. The frizzen is flanged to seal tightly, an L&R feature. Notice the nice roller bearing on the frizzen, and matching cam on the frizzen spring.

Inside, the tumbler and sear have raised bearing rings turned around each axis of rotation, holding the parts away from the plate, to minimize friction, and speed up ignition.

A fly detent is fitted to the tumbler’s mortise, preventing the sear from accidentally engaging the half cock notch when fired. Suitable for use with plain or double set triggers, on rifle barrels as small as
3/4” or as large as 1” octagon.

This nice lock shares internal parts with other fine L&R locks. Notice the “cutaway” tumbler and “swing out” link, which simplify disassembly of the lock for cleaning. Always reassemble the link in the ‘S’ orientation, with the small end at top, when viewed from inside. Never assemble the link back-wards, else the tumbler will break!

The lock plate is polished inside. Exterior parts are gray matte grit blasted, ready for browning. Internal parts come close to the edge of the plate. Don’t be tempted to over-inlet moving parts.

We recommend that you order a dozen Flint-#ENG-5 English 5/8" gun flints, too.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_134.pdf Last updated:4/25/2012 (128 KB) page_135.pdf Last updated:4/25/2012 (112 KB) page_178.pdf Last updated:4/25/2012 (96 KB)
English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Part Number: FLINT-ENG-5
Availability: Out of Stock, request notification when available.
Price: $2.95
  
Fly detent, steel, tempered, with hole for pivot
Fly detent, steel, tempered, with hole for pivot
Part Number: LOCK-LR-100-FL
Availability: In Stock
Price: $5.00
Order Quantity:
Stirrup link, wax cast steel, tempered, integral pins
Stirrup link, wax cast steel, tempered, integral pins
Part Number: LOCK-LR-100-LI
Availability: In Stock
Price: $13.50
Order Quantity:
Sear spring, die formed steel, tempered
Sear spring, die formed steel, tempered
Part Number: LOCK-LR-100-SS
Availability: In Stock
Price: $6.00
Order Quantity:
Sear spring screw, 6-40 thread
Sear spring screw, 6-40 thread
Part Number: LOCK-LR-100-SSX
Availability: In Stock
Price: $3.29
Order Quantity:
Tumbler screw, .400" head diameter, 6-40 thread
Tumbler screw, .400" head diameter, 6-40 thread
Part Number: LOCK-LR-100-TX
Availability: In Stock
Price: $5.25
Order Quantity:
Frizzen screw, .79" length, inside mount, 6-40 thread under head, used on early 900, 03 & 05 RPL locks
Frizzen screw, .79" length, inside mount, 6-40 thread under head, used on early 900, 03 & 05 RPL locks
Part Number: LOCK-LR-900-FX
Availability: In Stock
Price: $4.00
Order Quantity:
Top jaw screw, slotted, 1.3", 1/4-28 thread
Top jaw screw, slotted, 1.3", 1/4-28 thread
Part Number: LOCK-LR-900-TJX
Availability: In Stock
Price: $7.00
Order Quantity:
Bridle & sear screw, .625" length, 6-40 thread
Bridle & sear screw, .625" length, 6-40 thread
Part Number: LOCK-LR-1100-BX
Availability: In Stock
Price: $3.29
Order Quantity:
Frizzen spring, wax cast steel, tempered, with cam for roller
Frizzen spring, wax cast steel, tempered, with cam for roller
Part Number: LOCK-LR-1100-FS
Availability: In Stock
Price: $30.00
Order Quantity:
Frizzen spring screw, cut to .400", 6-40 thread
Frizzen spring screw, cut to .400", 6-40 thread
Part Number: LOCK-LR-1100-FSX
Availability: In Stock
Price: $3.29
Order Quantity:
Frizzen roller bearing & pin, tempered steel
Frizzen roller bearing & pin, tempered steel
Part Number: LOCK-LR-1100-RP
Availability: In Stock
Price: $4.00
Order Quantity:
Sear, wax cast steel, tempered, use 6-40 screw
Sear, wax cast steel, tempered, use 6-40 screw
Part Number: LOCK-LR-1100-SE
Availability: In Stock
Price: $24.00
Order Quantity:
Tumbler, wax cast steel, tempered, tapped 6-40
Tumbler, wax cast steel, tempered, tapped 6-40
Part Number: LOCK-LR-1100-TU
Availability: In Stock
Price: $34.50
Order Quantity:
Bridle, wax cast steel, use 6-40 screws
Bridle, wax cast steel, use 6-40 screws
Part Number: LOCK-LR-1700-BR
Availability: In Stock
Price: $24.00
Order Quantity:
Frizzen, as cast, cut for roller, requires fitting
Frizzen, as cast, cut for roller, requires fitting
Part Number: LOCK-LR-1700-FR
Availability: In Stock
Price: $36.00
Order Quantity:
Mainspring, wax cast steel, tempered
Mainspring, wax cast steel, tempered
Part Number: LOCK-LR-1700-MS
Availability: In Stock
Price: $29.99
Order Quantity:
Top jaw, .64 x .87", with .25" hole
Top jaw, .64 x .87", with .25" hole
Part Number: LOCK-LR-1700-TJ
Availability: In Stock
Price: $13.00
Order Quantity:
flint cock, 1.3" throw
flint cock, 1.3" throw
Part Number: LOCK-LR-BED-F-CO
Availability: In Stock
Price: $25.50
Order Quantity:
lock plate, .86 x 5.48", drilled & tapped
lock plate, .86 x 5.48", drilled & tapped
Part Number: LOCK-LR-BED-F-PL
Availability: In Stock
Price: $54.00
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $22.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $39.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards