Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and L&R 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped for a right hand shooter, with 1" straight octagon barrel channel. The stock will accept barrels up to 38" in length. All have 7/16" ramrod hole drilled full depth, and a shaped forend. The buttplate is uncut. Order our Hawken plans to help layout and design this project.
Drop is about 3-1/2" from the line of sights. The stock is not cut for a buttplate, so you may adjust the trigger reach, up to about 15" length. The butt end is about 4-15/16" x 1-5/16", for our early wide Hawken buttplate. This fullstock has the correct early Hawken style square cheekpiece, not the later Hawken beavertail cheek.
Our pre-inlet stock has a 38" straight octagon 1" barrel channel. Tang is cut for L&R flint hooked breech and tang, #PLUG-LRF-16-3. Trigger mortise is pre-inlet for L&R Hawken triggers, #TR-LR-1300. The ramrod hole and channel is drilled full depth for a 7/16" diameter ramrod. Lock panels are shaped and inlet for lock. Stock is inlet for L&R late English flint lock. Choose either single #LOCK-LR-900 or double throated cock, #LOCK-LR-900-D. Percussion lock can be used with drum and nipple. Use #LOCK-LR-300.
Specifications for pre-inlet stocks:
Drop and trigger reach: drop is 3-1/2" from the line of sights to heel, at 15" of pull
Barrel channel size: 1" straight octagon, up to 38" length
