Northwest Trade Gun, 20 gauge, 33" tapered octagon-to-round barrel, LOTT flintlock, maple, brass & iron, used

Home > Guns > Flintlock guns > Flintlock smooth bore guns

Northwest Trade Gun,
20 gauge, 33" tapered octagon-to-round barrel,
LOTT flintlock, maple, brass & iron, used

Part Number:	AAW-028
Availability:
Price:	$1,799.00
Order Quantity:

This classic North West Trade Gun has been stocked in maple and very neatly fitted and finished. The traditional styled trade gun hardware in a mixture of brass and iron furniture. This 20 gauge, .62 caliber, smooth bore flint fowling gun is fully qualified for use in the NMLRA North West Trade Gun match, using patched round balls at paper targets, and bird shot at clay birds on the trap range. This unsigned Trade Gun is used, but has been well maintained, with a bright clean bore. Trigger reach is 13-7/8" to fit a larger or taller shooter. Weight is a modest 6.5 pounds.

The 33" barrel is tapered octagon, with a transition to sixteen flats, two wedding bands, and tapered round to the muzzle. The bore is .620" diameter, for our cast lead round ball and patch. We recommend our .595" pure lead round ball, patched with .015" Ox-Yoke patches, lubricated with Ox-Yoke Wonder Lube, for easy loading. We offer 20 gauge (.62 caliber) wads, cards, and shot for wing shooting. This trade gun has no rear sight, allowing it to qualify under NMLRA Trade Gun Match rules. The octagon-to-round barrel is nicely finished to silvery-gray. The finish has worn bright around the breech and in frequently handled areas. A nickel silver blade front sight is soldered 2" behind the muzzle. The straight tang of the breech plug has a single bolt that passes through the stock to engage a brass plate below. Three pins retain the barrel to the forearm.

This North West Trade Gun is reddish brown with a golden undertone with a satin finish. The stock has a few minor handling marks from field use. The furniture is a correct mixture of brass and iron. The traditional style square buttplate, serpent sideplate, and ramrod pipes are all made of brass, while the triggerguard is iron. The buttplate is secured with two screws, one of the various traditional methods used to mount Trade Gun buttplates. The bottom view shows the large iron triggerguard, polished bright, and correctly surface mounted. Two screws retain the rear of the triggerguard, and one in the front. The ramrod pipes are thin brass, with embossed grooves, much like the corrugations in cardboard, to give the pipes maximum strength against crushing or denting in hard use. The pipes allow the 3/8" ramrod to slide smoothly, to serve the barrel. The ramrod is decorated with a barber pole design and is fitted with a brass loading tip with 8-32 threads for loading and cleaning accessories. The brass sideplate is cast in the form of a serpent, a traditional motif for the North West Gun. We believe that this stylized serpent sideplate evolved from the flat sideplates, embossed or engraved to resemble a serpent, found on Queen Anne and later English Sea Service muskets. Two lock bolts retain the sideplate and pass through the stock to engage the lock on the opposite side. The rear is a screw that retains the sideplate to the stock.

The large round faced LOTT flint lock by Davide Pedersoli, has been reshaped and marked to give it a more historical appearance. The plate is accented with a double line border on the plate, cock, top jaw, and frizzen. The tail is stamped 1856 and the Fox in the Circle mark is stamped beneath the pan. The Fox in a Circle trade mark is commonly found on antique trade guns, and this ancient mark was a sign of quality. This lock has a bright finish with a few speckles from use. We strongly recommend our best 7/8" size English knapped flints #FLINT-ENG-7, for best performance in this lock. An essential element for fast ignition, the vent is centered on the pan, correctly positioned above the bottom of the pan, to serve as a window, centered on the heat of the incandescent flash. The single trigger provides a smooth release of the lock.

This used Trade Gun has been well maintained with a bright bore. It will be perfect for your next reenactment or hunting trip. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.595" round balls, pure lead, hand cast, per 50

Part Number:	BALL-595-X
Availability:
Price:	$18.99
Order Quantity:

.600" round balls, pure lead, hand cast, per 25

Part Number:	BALL-600-X
Availability:
Price:	$15.49
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore mop, 100% Cotton, for .62 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-62-10
Availability:
Price:	$4.99
Order Quantity:

Ball puller, steel screw, .62 caliber brass collar, 10-32 thread

Part Number:	BP-62-10
Availability:
Price:	$4.69
Order Quantity:

Bore brush, bronze, for .62 caliber, 10-32 thread

Part Number:	BRUSH-62-10
Availability:
Price:	$4.99

English Powder Dipper, adjustable brass cup, calibrated in drams of black powder, patterned from an antique, made in the U.S.A.

Part Number:	DIPPER-P-35
Availability:
Price:	$33.95
Order Quantity:

English Shot Dipper, adjustable brass cup, calibrated in ounces of shot, patterned from an antique, made in the U.S.A.

Part Number:	DIPPER-S-15
Availability:
Price:	$33.95
Order Quantity:

Flint priming flask, throws about 3 grains, brass

Part Number:	FLASK-PP-3
Availability:
Price:	$19.99
Order Quantity:

English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-5
Availability:
Price:	$2.95

English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-6
Availability:
Price:	$3.00

English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-7
Availability:
Price:	$3.50
Order Quantity:

Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-7-PACK-12
Availability:
Price:	$39.60
Order Quantity:

Button jagged cleaning tip, 20 gauge, brass, 10-32 thread

Part Number:	JAG-20-10
Availability:
Price:	$3.99
Order Quantity:

Lee .600" round ball mold, double cavity, with handles, for .62 rifles and 20 gauge guns.

Part Number:	LEE-600-DC
Availability:
Price:	$37.99
Order Quantity:

Mold, Lyman .600" round ball mold blocks, single cavity, use large handles

Part Number:	LYMAN-600
Availability:
Price:	$99.00
Order Quantity:

Handles for large mold blocks, by Lyman, fits all current single and double cavity molds

Part Number:	LYMAN-H-L
Availability:
Price:	$53.99
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59
Order Quantity:

Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry

Part Number:	OX-15-60-D
Availability:
Price:	$4.99
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler

Part Number:	PICK-BRUSH-H
Availability:
Price:	$14.99
Order Quantity:

Forged steel vent pick, 2-1/2" long, for rifle

Part Number:	PICK-VENT-2
Availability:
Price:	$2.99
Order Quantity:

Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread

Part Number:	RAMROD-7-10-B
Availability:
Price:	$19.99
Order Quantity:

Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds

Part Number:	SHOT-4
Availability:
Price:	$37.99
Order Quantity:

Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.

Part Number:	ST-8
Availability:
Price:	$9.99
Order Quantity:

20 gauge, .625" ideal for .615" bore, .125" over powder card, 1000, by Circle Fly Wads

Part Number:	WAD-20-A
Availability:
Price:	$12.69
Order Quantity:

20 gauge, .625" ideal for .615" bore, .025" over shot card, 1000, by Circle Fly Wads

Part Number:	WAD-20-B
Availability:
Price:	$12.69
Order Quantity:

20 gauge, .625" ideal for .615" bore, .500" thick fibre wad, 500, by Circle Fly Wads

Part Number:	WAD-20-C
Availability:
Price:	$12.69
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock smooth bore guns