U.S. Model 1873 Springfield
caliber .45-70 Gov't, 32" barrel,
excellent bore, sanded walnut stock, iron furniture
Part Number: AAW-131
Availability: In Stock
Price: $1,199.99
Order Quantity:
This U. S. Model 1873 Springfield rifle trapdoor rifle has a bright shootable bore. The rifle appears to be a mixture of period parts, which was common for guns sold as military surplus. The Director of Civilian Marksmanship offered Trapdoor rifles to NRA members at low cost, and such famous mail order merchants as Bannermans and Sears and Roebuck listed such guns in their early catalog. Stocked in walnut the wood has been sanded and the cartouche marks are no longer visible. The barrel, and most of the furniture have a well aged dark brown patina. Internally the bore is bright, and appears it would make a fine shooter for a BPCR enthusiast. Weighing in at 8.9 pounds, with a trigger reach of 13-1/4" it will fit today's modern size shooter well.

The wood has been sanded, which has removed all the cartouche marks. The stock has a dark black area at the butt end that appears to be epoxy. The military style buttplate if wide and lightly curved, made to absorb the recoil of the .45-70 cartridge. Our top view of the trapdoor shows off the thumbnail comb extension of the buttplate, clearly marked U.S.. The buttplate has aged to a dark brown patina. Moving up the stock, the short tang can be seen, the tang bolt has some wear to the slot from a improperly fitted screw driver. The serial number of the rifle, 151xxx, can be seen at the forward most portion of the breech. The trapdoor itself is also marked U.S. / MODEL / 1884 in three lines, which is much later period than the action.

Ahead of the breech and trapdoor, the barrel is 32" to the muzzle. The proper 1879 ladder style rear sight and front blade can be found on the rifle. The screws that mount the rear sight have some damage to the screw slots. The markings on the barrel are quite visible, the classic V over P over the upraised eagle's head with an addition P at the breech. From below the rounded toe of the rifle can be seen leading forward to the blued triggerguard. The toe of the stock has some small chips missing as well as dents that were too deep to remove with sanding. The stock cartouche behind the triggerguard is no longer visible. The triggerguard has a sling swivel on the forward bow that is matched by a front swivel on the front barrel band.Two barrel bands hold the barrel to the stock while also supporting the ramrod below. Each of the bands is properly marked with a U, the open end of which faces toward the muzzle. Below the barrel the 1878 period cupped face ramrod is held securely in position, its open channel has chips on both sides behind the muzzle cap. The rear view reveals some of the small handling marks that were not removed with sanding on this U. S. 1873 Springfield rifle.

The lock works crisply, and the trigger release is positive and smooth at about 3 pounds pressure. The lock plate is marked with an eagle next to U.S. / Springfield in two lines. The lock has the three position tumbler. The lock panel has some chips behind the lock plate along the upper rear edge. For additional information on the trapdoor rifles, see the book The .45-70 Springfield by Joe Poyer and Craig Riesch.

This antique Trapdoor Springfield Rifle is assembled from mixed period parts with a bright shootable bore. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
SPG Black Powder Cartridge Reloading Primer, revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe
Part Number: BOOK-SPG
Availability: In Stock
Price: $34.95
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.59
Order Quantity:
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
Part Number: BORE-MOP-45-10
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $4.29
Order Quantity:
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
Cartridge Case, .45-70 Government, unprimed brass, correct head stamp, 2.1", by Starline, 50 pieces
Part Number: CASE-45-70-PACK-050
Availability: Out of Stock, request notification when available.
Price: $26.50
Special Restrictions Apply
Not available for export outside the U.S.A.
  
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .457" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-457-EXP
Availability: In Stock
Price: $3.99
Order Quantity:
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .458" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-458-EXP
Availability: In Stock
Price: $3.99
Order Quantity:
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
Neck Expander Plug, .459" diameter, to fit our Lee 7/8-14 die
Part Number: DIE-459-EXP
Availability: In Stock
Price: $3.99
Order Quantity:
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
Part Number: JS-45-6-8
Availability: In Stock
Price: $4.59
Order Quantity:
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
Part Number: LEE-90268
Availability: In Stock
Price: $45.99
Order Quantity:
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
Part Number: LEE-90374
Availability: In Stock
Price: $36.99
Order Quantity:
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges
LEE Classic Cast Reloader Press, for pistol or rifle cartridges
Part Number: LEE-90998
Availability: In Stock
Price: $210.99
Order Quantity:
Lee Liquid Alox, 4 oz. bottle
Lee Liquid Alox, 4 oz. bottle
Part Number: LEE-ALOX
Availability: In Stock
Price: $7.99
Order Quantity:
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
LEE Loading Dies, caliber .45-70 Gov't, including shell holder
Part Number: LEE-DIE-45-70
Availability: In Stock
Price: $46.99
Order Quantity:
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately
Part Number: LEE-DIE-45-EX
Availability: In Stock
Price: $15.29
Order Quantity:
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
Part Number: LEE-HANDLE
Availability: In Stock
Price: $22.99
Order Quantity:
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
Part Number: LEE-SHELL-08
Availability: Out of Stock, request notification when available.
Price: $4.99
  
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $5.19
Order Quantity:
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
Bullet Mold, .457" diameter, 405 grain bullet mold, single cavity steel mold blocks, by Lyman
Part Number: LYMAN-457-193
Availability: In Stock
Price: $99.00
Order Quantity:
Case Lube,
2 oz. bottle, by Lyman
Case Lube, 2 oz. bottle, by Lyman
Part Number: LYMAN-CASE-LUBE
Availability: In Stock
Price: $6.99
Order Quantity:
Case Lube Pad,
by Lyman
Case Lube Pad, by Lyman
Part Number: LYMAN-CASE-PAD
Availability: In Stock
Price: $9.99
Order Quantity:
Lyman Three Die Set,
for .45-70 Government
Lyman Three Die Set, for .45-70 Government
Part Number: LYMAN-DIE-45-70
Availability: Out of Stock, request notification when available.
Price: $67.99
  
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
Handles for large mold blocks, by Lyman, fits all current single and double cavity molds
Part Number: LYMAN-H-L
Availability: In Stock
Price: $53.99
Order Quantity:
.457" Sizing & Lube die,
by Lyman
.457" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-457
Availability: In Stock
Price: $38.99
Order Quantity:
.458" Sizing & Lube die,
by Lyman
.458" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-458
Availability: In Stock
Price: $38.99
Order Quantity:
.459" Sizing & Lube die,
by Lyman
.459" Sizing & Lube die, by Lyman
Part Number: LYMAN-HI-459
Availability: In Stock
Price: $38.99
Order Quantity:
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
Shell holder #17, by Lyman, fits .40-65 & .45-70 to .45-120
Part Number: LYMAN-SHELL-17
Availability: In Stock
Price: $9.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $4.49
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards