Kodiak Express Double Rifle,
.50 caliber, 28" barrels,
percussion, checkered walnut, iron trim,
used, by Davide Pedersoli
Part Number: AAW-127
Availability: In Stock
Price: $1,349.00
Order Quantity:
This Pedersoli Kodiak Express rifle is stocked in walnut with a checkered straight wrist and forearm. The .50 caliber barrels are 28" long. Locks are finished bright with engraved bear scene and scroll designs. The stock and ramrod pipe have sling swivel lugs. This double rifle is used with minor handling marks. Both bores are bright and have been well maintained. The 13-1/2" and 14-1/4" length of pull should fit todays average shooter. The rifle weighs 10.8 pounds.

The 28" blued barrels are .50 caliber, rifled with a 1 in 56" twist for a patched round ball. The bores are bright and have been well maintained. The elevated bead front sight ramp is mounted to the rib. Two folding leaf rear sights are mounted at the breech. Each rear sight is individually adjustable for elevation and windage. The rear sight is mounted with a Phillips head screw, which is a replacement. The top of the left barrel is marked Kodiak cal .50 and the right is marked Trail Gun Armory Houston, Texas, near the breech. The blue barrel finish has a few marks from handling.

The walnut stock is checkered at the wrist and the forearm, and shows only a few minor handling marks. Fitted with a blued steel buttplate, the flat surface will help absorb the recoil from the .50 caliber double barrels. The long tang is finished bright with engraved designs. The rear two screws are properly spaced to accept our Creedmoor Vernier 3" tang sight. However, most hunters prefer the open sights as issued, when hunting big game. A single wedge key retains the barrel to the forearm. The wedge key allows you to quickly dismount the barrels, without using tools. The hooked breech allows for easy cleaning of the barrels, without risk of wetting the stock. We note that the barrel underlug with clearance hole for the ramrod is bent out of round. The wedge key still fits correctly.

The long trigger plate is finished bright while the triggerguard is finished to a dark blue. The ramrod entry pipe is also finished to a dark blue. The rear sling swivel stud is securely mounted in the buttstock, while the forward swivel is mounted to the rear ramrod pipe. The stock has a brass initial plate that has aged to a mellow patina from long storage. The wooden ramrod is fitted with a brass loading tip. The opposite end is fitted with a brass tip threaded 10-32 to accept cleaning and loading accessories. The stock is shaped with a cheek piece for a right hand shooter.

The Pedersoli Express Rifle bar locks are engraved with a bear scene and scroll designs. The locks and triggers function as they should. Stainless steel 1/4-28 nipples for No. 11 caps are fitted. We offer replacement nipples for No. 11 caps, or the large musket caps, which are a popular choice on these rifles if you plan to hunt in cold weather.

This Kodiak Double Rifle is a good serviceable example of a large caliber double rifle. With bright well maintained bores, it will serve you well in the field. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $16.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.59
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $4.29
Order Quantity:
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $12.59
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.99
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread
Part Number: JS-50-7-10
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $20.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.99
Order Quantity:
Nipple Wrench for Rifles & Shotguns,
slotted end for #11 nipple
Nipple Wrench for Rifles & Shotguns, slotted end for #11 nipple
Part Number: NW-120
Availability: In Stock
Price: $9.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $4.79
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $5.79
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $19.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: Out of Stock, request notification when available.
Price: $6.89
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards