Lock, H. E. Leman Indian Trade Rifle,
percussion, right hand, copied from Track's antique,
using Ron Long's best Hawken style internal parts
made in the U.S.A. by R. E. Davis
Part Number: LOCK-LEMAN-CL-R
Availability: In Stock
Price: $149.00
Order Quantity:
Henry Eicholtz Leman, Lancaster, Pennsylvania, was a prolific gun maker, one of the first longrifle makers to adopt factory production techniques.

H. E. Leman used this style lock on “trade rifles" offered to the wholesale trade.

These rifles were then resold by merchants and traders to westbound emigrants traveling down the Ohio River to Saint Louis.

This lock is correct for late longrifles, Ohio rifles, and Indian trade rifles of the 1840 to 1880 era. Unmarked, Leman often stamped his name, city, and some "engraving" (embossed with a scroll pattern hand stamp, rotated and repeated) on the hammer neck and lock plate. Other gun makers used the lock unmarked, or engraved or stamped their name and their city.

Locks made by Henry Leman's factory often have this distinctive flat tail at the rear of the lock.

The lock plate is matte finished on all surfaces, ready to be browned, blued, or polished bright. We recommend our #TRACK-BROWN reagent, for a smooth even chocolate brown finish, easily controlled.

Pre-cut for H. E. Leman's large 9/16 inch diameter powder drum. Order our matching powder drum #DRUM-9-5-F-SQ and #RST-I nipple.

The hammer has a 1.75" throw, for use with our H.E. Leman Indian Trade Rifle parts, and is designed for use with a 1" octagon barrel, as original. Is this lock architecture correct? Yes, we have the original antique Leman rifle on display in our store in Elk River, Minnesota. Not scarce, Henry Leman made a great number of these locks for his Trade Rifles, and for mail order sale to other gun makers.
Adobe Reader required to view the files below.
Get Adobe Reader
page_128.pdf Last updated:4/25/2012 (124 KB) page_185.pdf Last updated:4/25/2012 (141 KB)
Powder drum, 9/16" diameter, 5/16-24 thread, not drilled for nipple, square shank end in the style of H.E. Leman
Powder drum, 9/16" diameter, 5/16-24 thread, not drilled for nipple, square shank end in the style of H.E. Leman
Part Number: DRUM-9-5-F-SQ
Availability: In Stock
Price: $6.99
Order Quantity:
Bridle, wax cast steel, use three 5-40 screws
Bridle, wax cast steel, use three 5-40 screws
Part Number: LOCK-JB-R-BR
Availability: In Stock
Price: $10.99
Order Quantity:
Bridle & Sear screw, .500" length, 5-40 thread
Bridle & Sear screw, .500" length, 5-40 thread
Part Number: LOCK-JB-R-BX
Availability: In Stock
Price: $2.29
Order Quantity:
Fly Detent, right hand, tempered steel, for Ron Long style locks by R. E. Davis
Fly Detent, right hand, tempered steel, for Ron Long style locks by R. E. Davis
Part Number: LOCK-JB-R-FL
Availability: In Stock
Price: $11.99
Order Quantity:
Stirrup link & pin, wax cast steel, fits right & left hand, tempered
Stirrup link & pin, wax cast steel, fits right & left hand, tempered
Part Number: LOCK-JB-R-LI
Availability: In Stock
Price: $11.99
Order Quantity:
Mainspring, wax cast steel, right hand, tempered
Mainspring, wax cast steel, right hand, tempered
Part Number: LOCK-JB-R-MS
Availability: In Stock
Price: $25.50
Order Quantity:
Sear, wax cast steel, tempered, right hand, use 5-40 screw
Sear, wax cast steel, tempered, right hand, use 5-40 screw
Part Number: LOCK-JB-R-SE
Availability: In Stock
Price: $21.99
Order Quantity:
Sear spring, die cut steel, tempered, use 5-40 screw
Sear spring, die cut steel, tempered, use 5-40 screw
Part Number: LOCK-JB-R-SS
Availability: In Stock
Price: $12.99
Order Quantity:
Sear spring screw, 5-40 thread
Sear spring screw, 5-40 thread
Part Number: LOCK-JB-R-SSX
Availability: In Stock
Price: $2.29
Order Quantity:
Tumbler, right hand, tapped 5-40, cut for fly detent, tempered
Tumbler, right hand, tapped 5-40, cut for fly detent, tempered
Part Number: LOCK-JB-R-TU
Availability: In Stock
Price: $32.99
Order Quantity:
Hammer, 1.75" throw, right hand, as cast
Hammer, 1.75" throw, right hand, as cast
Part Number: LOCK-LEMAN-HA
Availability: In Stock
Price: $13.99
Order Quantity:
Lock plate, 4.86 x 1.08" as cast, right hand
Lock plate, 4.86 x 1.08" as cast, right hand
Part Number: LOCK-LEMAN-PL
Availability: In Stock
Price: $15.99
Order Quantity:
Tumbler screw, 5-40 thread, .375" diameter head
Tumbler screw, 5-40 thread, .375" diameter head
Part Number: LOCK-LEMAN-TX
Availability: In Stock
Price: $4.79
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $39.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards