S. Hawken left hand, percussion lock, by L&R

Home > Gun Parts > Locks > S. Hawken - Saint Louis, percussion, right & left hand lock, by L&R Lock Co.

S. Hawken left hand, percussion lock, by L&R

Part Number:	LOCK-LR-200
Availability:
Price:	$160.00
Order Quantity:

Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks.

Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features.

Fitted with a fly detent for use with set triggers. A swivel link with integral pins hooks into the cut-away tumbler arm, to allow simple disassembly. Beware: the link must not be installed backwards, or the link and mainspring will be broken on first use. The small diameter pin hooks into cut-away tumbler arm, and “S” orientation allows essential mainspring clearance. Don’t break it! Plate is finished bright inside and out. Cut the plate for the drum or patent breech. Fit a thin card pattern to the breech, trace it to the lock plate, file to fit. It is easier than it sounds. The hammer has a 1.625” throw, for use with octagon barrels from 13/16” to 1-1/8” at the breech. This left hand S. Hawken cap lock exactly matches our right hand lock, for use on double rifles.

This lock exactly matches our right hand Sam Hawkenpercussion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.

Adobe Reader required to view the files below.

page_183.pdf Last updated:4/25/2012 (96 KB)

Bridle screw, 6-40 thread

Part Number:	LOCK-LR-100-BX
Availability:
Price:	$3.29
Order Quantity:

Fly detent, steel, tempered, with hole for pivot

Part Number:	LOCK-LR-100-FL
Availability:
Price:	$5.00
Order Quantity:

Stirrup link, wax cast steel, tempered, integral pins

Part Number:	LOCK-LR-100-LI
Availability:
Price:	$13.50
Order Quantity:

Sear spring screw, 6-40 thread

Part Number:	LOCK-LR-100-SSX
Availability:
Price:	$3.29
Order Quantity:

Sear screw, .59" length, 6-40 thread

Part Number:	LOCK-LR-100-SX
Availability:
Price:	$3.29
Order Quantity:

Tumbler screw, .400" head diameter, 6-40 thread

Part Number:	LOCK-LR-100-TX
Availability:
Price:	$5.25
Order Quantity:

bridle, left, wax cast steel, use 6-40 screws

Part Number:	LOCK-LR-200-BR
Availability:
Price:	$24.00
Order Quantity:

hammer, left, wax cast steel, 1.75" throw

Part Number:	LOCK-LR-200-HA
Availability:
Price:	$25.50
Order Quantity:

Mainspring, left, tempered steel, tempered

Part Number:	LOCK-LR-200-MS
Availability:
Price:	$36.00
Order Quantity:

Lock plate, 4.8 x 1.0", drilled & tapped, left hand

Part Number:	LOCK-LR-200-PL
Availability:
Price:	$45.00
Order Quantity:

sear, left, wax cast steel, tempered, use 6-40 screw

Part Number:	LOCK-LR-200-SE
Availability:
Price:	$24.00
Order Quantity:

sear spring, left, die formed steel, tempered

Part Number:	LOCK-LR-200-SS
Availability:
Price:	$6.00
Order Quantity:

tumbler, left, wax cast steel, tempered, tapped 6-40

Part Number:	LOCK-LR-200-TU
Availability:
Price:	$34.50
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Mainspring Vise, to safely compress a mainspring

Part Number:	TOOL-VISE
Availability:
Price:	$22.99
Order Quantity:

Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.

Part Number:	TOOL-VISE-DX
Availability:
Price:	$39.99
Order Quantity:

Top of Page Home > Gun Parts > Locks > S. Hawken - Saint Louis, percussion, right & left hand lock, by L&R Lock Co.